Sail and One Design Covers and Accessories

Kingston Sail Loft makes some sail covers, dinghy/one design blade bags, custom sail bags/deck bags, and dinghy slot gaskets, in-house, and as a Hyde Sails dealer also bring in some high quality one design top and bottom covers, mast bags, blade bags, deck bags, spinnaker launching bags, etc. from them.

We can bring in anything Hyde Sails makes. See their web page at: https://www.hydesails.com/product-category/dinghies-keelboats/

Hyde makes sails, covers, and accessories for a number of dinghy and one design keelboat classes.  We are stocking a few Hyde ILCA/Laser training sails and covers. We also stock some hard-to-find Selden, Seasure (rudder fittings), Allen, Harken, and Ronstan fittings used on 505s and Albacores, have a Selden 505 Alto and carbon boom in stock, and plan to stock a few 505 and Albacore masts and booms.

We currently have in stock 505, Albacore, 420, and ILCA/Laser covers, 505 mast bags, ILCA 6 and 7 Training sails, ILCA sail tube bags and combi/blade bags, 505 and Albacore slot gaskets, and can provide covers, blade bags, and other accessories for other classes.

The Hyde Sails 505 bottom cover folds into a built in carrying bag
A 505 flat top cover that also fits over the boom
The 505 top cover also fits well over the boom
A 420 flat top cover. The Albacore cover is similar, and we are working on a over boom Albacore cover
The 505 mast bag. Shrouds, trapeze wires, spreaders, etc. all stay attached as the bag gas openings built in
A nice detail on the 420 cover: A flap over the bow zipper covering the zipper
An in-house built custom tube sail bag with a full length zipper and round ends. The customer wanted a bag that he could easily put a rolled up, fully battened, main into
An ILCA/Laser Combi/blade bag
A custom trapeze harness built in-house
An ILCA/Laser rudder bag designed and built in-house
A in-house built J35 sail cover to go over a rolled laminate main
A prototype 505 rudder bag designed and built in-house
An in-house built Nonsuch 26 sail cover
We make 505 and Albacore slot gaskets,, and can make slot gaskets for other dinghy classes
We stock a few key Seasure, Selden and other fittings for dinghies. We are not a chandlery, but want to have some of the fittings you need to get you back on the race course ASAP instead of waiting for key parts to be delivered
We stock a small number of key Selden parts including the heavy duty mast step, goosenecks (this one is the standard, but we also try to stock the heavy duty gooseneck), the heel tenon, and the T-hook for line attachment. The rubber is for the fairing at the front of the slot gaskets
A reinforced high-load vang attachment fitting from Waterat Sailing Equipment in California. These slide into the Selden 2633 aluminum boom. The result is considerably stronger and stiffer than when using standard Selden fittings. The 2633 boom section is used on some 505s, Albacores and Sharks
The Selden heavy duty gooseneck for the Alto or Cumulus masts
Kingston Sail Loft has UHMW centreboard shim tape in three thicknesses, and UHMW strips for mast gate shims in three thicknesses